Comtech EF Data CDM-570A Installation And Operation Manual page 276

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Serial-based Remote Product Management
Command
Parameter (Instruction
Type Code and
Qualifier)
Tx BERT BTX= 1 byte, value of
State 0 or 1
Rx BERT BRX= 1 byte, value of
State 0 or 1
Tx BERT TBP= 1 byte
Pattern
Rx BERT RBP= 1 byte
Pattern
BERT Error Insert BKE= 1 byte, value of
0 or 1
BERT Restart BRM= None
Monitor
Arguments for
Command or
Response to
Query
Command or Query.
Valid only in CDM-570A Compatible Mode (CMO=1).
Sets or returns Tx BERT State in the form x, where:
0 = Off
1 = On
Example: <0/BTX=1 (Tx BERT On)
Command or Query.
Valid only in CDM-570A Compatible Mode (CMO=1).
Sets or returns Rx BERT State in the form x, where:
0 = Off
1 = On
Example: <0/BRX=1 (Rx BERT On)
Command or Query.
Valid only in CDM-570A Compatible Mode (CMO=1).
Sets or returns Tx BERT Pattern, in the form x, where:
0=1:1
1=2047
2=2^15-1
3=2^23-1
Example: <0/TBP=1 (Tx BERT Pattern is 2047)
Command or Query.
Valid only in CDM-570A Compatible Mode (CMO=1).
Sets or returns Rx BERT Pattern, in the form x, where:
0=1:1
1=2047
2=2^15-1
3=2^23-1
Example: <0/RBP=1 (Rx BERT Pattern is 2047)
Command only.
Valid only in CDM-570A Compatible Mode (CMO=1).
Inserts 1 error in the form x, where:
x=1
Example: <0/BKE=1
Command only.
Valid only in CDM-570A Compatible Mode (CMO=1).
This command takes no arguments.
Restarts the BERT Monitor.
Example: <0/BRM=
Description of Arguments
8–32
MN-CDM570A
Revision 3
Query
Response to
(Instruction Code
Command
and Qualifier)
BTX= BTX? BTX=x
BTX? (see Description of
BTX# Arguments)
BRX= BRX? BRX=x
BRX? (see Description of
BRX# Arguments)
TBP= TBP? TBP=x
TBP? (see Description of
TBP# Arguments)
RBP= RBP? RBP=x
RBP? (see Description of
RBP# Arguments)
BKE= N/A BKE=x
BKE? (see Description of
BKE# Arguments)
BRM= N/A N/A
Response to
Query