Comtech EF Data CDM-570A Installation And Operation Manual page 230

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Ethernet-based Remote Product Management
•
Initialize Events Pointer – Click to reset the Event Log's internal pointer.
Click [Submit] to save.
• Unread Events – This scrollable, read-only window displays the total number of unread
stored events. As stored event groups are displayed, the counter decrements accordingly.
Statistics Log
If you change your operating mode between IP-ACM Mode and any mode other
than IP-ACM Mode, Comtech EF Data recommends that you first select, and then
submit, Clear Statistics Log before you attempt to select and submit Read Next Five
Statistics.
•
Read Next Five Statistics – Click to buffer the next group of five stored events into the
scrollable, read-only statistics window.
•
Clear Statistics Log – Click to erase all entries from the stored Statistics Log.
•
Initialize Statistics Pointer – Click to reset the Statistics Log's internal pointer.
Click [Submit] to save.
Unread Statistics – This scrollable, read-only window displays the total number of unread
•
stored statistics. As stored statistics are displayed, the counter decrements accordingly.
Alarm Mask
Use the available option buttons to designate an alarm as Masked or Active. Click [Submit
Alarm Mask] to save.
7–58
MN-CDM570A
Revision 3