Comtech EF Data CDM-570A Installation And Operation Manual page 593

70/140 mhz satellite modem; l-band satellite modem; reduced chassis depth l-band satellite modem

Hide thumbs Also See for CDM-570A:

Table of Contents

CDM-570A/570AL Satellite Modem with Optional Packet Processor

Offline modem will display:

7. On the Online modem, select the Redundancy Configuration menu [R] from the CLI Main

Menu. Observe that the correct IP Addresses/Masks are displayed for the Local and

Redundant Units.

You must then set the Traffic IP Address/Mask (this also needs to be in the same subnet as

the Management IP addresses):

1:1 Redundancy (Auto Detected)

Redundancy: PARAM File Connection Established.

Redundancy: Sending PARAM File...

1:1 Redundancy (Auto Detected)

Redundancy: Received PARAM File...

Writing 5447 bytes to PARAM file on Flash

All configuration changes can only be made to the Online

CDM-570A/570AL-IP and require that you "Save Parameters to permanent

storage [S]" so that the configuration change is also applied to the Backup

CDM-570A/570AL.

Show Quick Links

Table of Contents

Troubleshooting