Comtech EF Data CDM-570A Installation And Operation Manual page 289

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Serial-based Remote Product Management
Command
Parameter (Instruction
Type Code and
Qualifier)
Redundancy N/A 1 bytes, 0 or 1
State
Temperature N/A 3 bytes
Offline Unit N/A 6 bytes
Status
Faults and N/A 6 bytes
Status
Arguments for
Command or
Response to
Query
Query only.
Returns the redundancy state of the unit in the form x, where:
0 = Offline
1 = Online
Example: <0/RED?
>0/RED=1 (selects Online)
Query only.
Returns the unit internal temperature, in degrees C, in the form sxx, where:
s = sign (+ or –)
xx = value
Example: <0/TMP?
>0/TMP=+26
Query only. (1:1 set-up)
Sent to the online modem of a 1:1 pair. Returns the fault status information (FLT?)
of the offline modem in the form abcdef, where:
abcdef = The FLT? response information from the offline unit
Note: This is the only way to interrogate the status of an offline modem at the
distant-end of a link.
Query only.
Returns the current highest-priority fault and status codes for the Unit
(hardware), Tx Traffic, Rx Traffic and ODU in the form abcdef, where:
a = Unit faults:
0 = No faults
1 = Power supply fault, +5 volts
2 = Power supply fault , +12 volts
3 = Power supply fault, –5 volts
4 = Reserved
5 = Power supply fault, –12 volts
6 = Tx synthesizer lock
7 = Rx 1st LO synthesizer lock
8 = Rx 2 nd LO synthesizer Lock
9 = Ref PLL lock
A = Reserved
B = Reserved
C = Reserved
D = Reserved
E = Packet Processor
F = Reserved
Description of Arguments
8–45
MN-CDM570A
Revision 3
Query
Response to
(Instruction Code
Command
and Qualifier)
N/A RED? RED=x
(See Description of
Arguments)
N/A TMP? TMP=sxx
(see Description of
Arguments)
N/A OUS? OUS=abcdef
(see Description of
Arguments)
N/A FLT? FLT=abcdef
Arguments)
Response to
Query
(see Description of