Admin | Pap Features; Figure 7-6. Admin | Pap Features Page - Comtech EF Data CDM-570A Installation And Operation Manual

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Ethernet-based Remote Product Management
7.4.3.2.4

Admin | PaP Features

1) This page is available only when you install the optional Packet Processor.
2) If you submit any changes to this page, you must also open the 'Admin | Pap
Save' page (see Chapter Sect. 7.4.3.2.7) and immediately click [Save PaP
Parameters].
-
Features – Standard
Use the drop-down lists to set operation as Enabled or Disabled:
• Telnet
• LAN-to-LAN Routing
• Downlink Route All Available Multicast
Click [Submit] to save.
Features – Optional
•
Chapter 5. FAST ACTIVATION PROCEDURE
•
Sect. 7.3 Admin | FAST Page
When an optional FAST feature is not available, its associated drop-down list appears
dimmed and is non-selectable.
Use the drop-down lists to set operation as Enabled or Disabled:
• IGMP
• Vipersat STDMA
•
VMS v3.x.x VIPERSAT Management System User Guide (CEFD P/N MN/22156)
•
Vipersat CDM-570/570L Satellite Network Modem User Guide (CEFD P/N
MN/22125)

Figure 7-6. Admin | PaP Features Page

• Ping Reply
• L2 Tx Header Compression
• L3/L4/L5 Rx Header Compression
• Vipersat File Streamer
7–19
• Managed Switch Multicast Option
• L2 Rx Header Compression
• Vipersat Management
• Vipersat Auto Switching
MN-CDM570A
Revision 3