Satellite Modem > Configuration > Bert (Bit Error Rate Test) Configuration - Comtech EF Data CDM-570A Installation And Operation Manual

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Optional Packet Processor - Serial/Telnet CLI Operation
9.3.8.1.10 Satellite Modem > Configuration > BERT (Bit Error Rate Test)
Configuration
Open the nested BERT Configuration page from the Configuration page.
Selection
BERT Tx State
BERT Rx State
BERT Tx Pattern
BERT Rx Pattern
Error Insert
Restart Monitor
Figure 9-36. BERT (Bit Error Rate Test) Configuration
Hot Key Description
Select the BERT Tx or Rx operating mode:
A
1 – Off
B
2 – On
Select the BERT Tx or Rx pattern:
C
1 – 1:1
2 – 2047
3 – 2^15-1
D
4 – 2^23-1
I Select to insert an error into the ongoing BERT.
R Select to restart the BERT Monitor.
9–53
MN-CDM570A
Revision 3