Comtech EF Data CDM-570A Installation And Operation Manual page 105

CDM-570A/570AL Satellite Modem with Optional Packet Processor
FAST Activation Procedure
4. Activate your purchased FAST features.
a) You must make sure you are active in the proper register. From the SELECT: FAST 
Cnfg submenu, use the ◄ ►arrow keys to select Edit Code. Press ENTER.
Use the ▲▼arrow keys to toggle Register 1 or 2.
b) Next, use the ◄ ►arrow keys to jump to the bottom line. There, use the ▲▼◄ ►
arrow keys to carefully enter each digit for your register-specific 20-character FAST
Access Code.
Press ENTER. The modem responds with "Configured Successfully" if the FAST upgrade
is accepted; the modem then resets to its newly-incorporated default configuration.
However, if an invalid code is entered, the following message displays:
Repeat the FAST Access Code entry procedure. Should the code entry error persist,
contact Comtech EF Data Product Support for further assistance.
When a FAST Access Code is obtained from Comtech EF Data, it will be for a
specific option register. The FAST options are linked to two option registers:
• Register1 is for Data Rate, L-Band, and Framing options.
•
Register2 is for Modulation type and Packet Processor options.
Fast Configuration:
Edit Code Demo Mode
Fast: Set register 2
00000000000000000000 ENT
Fast Code Rejected!
(ENTER or CLEAR)
5–3
MN-CDM570A
Revision 3