CDM-570A/570AL Satellite Modem with Optional Packet Processor
Optional Packet Processor - Serial/Telnet CLI Operation
9.3.8.1.6
Satellite Modem > Configuration > Alarm Mask Configuration
Open the nested Alarm Mask Configuration page from the Configuration page.
Selection
Tx FIFO
G.703 BPV
Tx AIS
RX AGC
E
/N
b
0
Rx AIS
Buffer Slip
External Reference
BUC
LNB
Figure 9-32. Alarm Mask Configuration
Hot Key
Description
A
Toggle to set alarm masking as Masked or Unmasked.
B
NOTE: These settings should always be set as Masked when IP is the
C
active data interface.
D
E
Toggle to set alarm masking as Masked or Unmasked.
F
G
Toggle to set alarm masking as Masked or Unmasked.
NOTE: This setting should always be set as Masked when IP is the
active data interface.
H
I
Toggle to set alarm masking as Masked or Unmasked.
J
9–49
MN-CDM570A
Revision 3