Kst Select:) Status - Comtech EF Data CDM-570A Installation And Operation Manual

CDM-570A/570AL Satellite Modem with Optional Packet Processor
CDM-570A/570AL ODU (Transceiver, BUC, LNB) Operation

10.2.1.2.2.1.3 (KST SELECT:) Status

STATUS:PS:OK RF:OK UC:OK
LNA:OK AG:OK HP:OK DC:OK
Use the ◄ ► arrow keys to select a feature, and then press ENTER to view more detailed status
information. The nested screens provide continually-updated, read-only operational summary
information, as follows:
Feature
(Selection)
PS
RF
UC
LNA
AG
HP
DC
For each detailed status display, the available status indications are as follows:
Summary Status
OK
FT
NA
Typical for all nested screens, press ENTER or CLEAR to return to the ODU: Enable  Status
submenu.
Designates
Power Supplies
Reference
Up Converter
Low Noise A detailed status display screen is not available for this
Amplifier selection.
AGC Status
HPA Status
Down Converter
Designates
OK – No Fault
Fault
Not Applicable
10–24
Detailed Status Display Example
P/Supplies: 7V:OK 17V:OK
-7V:OK 12V:OK
REF:WARM 72M:OK RANGE:NA
SRC:INT XLK:NA PHASE:NA
UPCONV STATUS: OVRTMP:OK
SSYN:OK KSYN:OK
AGC STATUS: EIP:OK
LOOP:OK IIP:OK
HPA: OVERTMP:OK 9.75V:OK
-5V:OK BIAS:OK
DNCONV STATUS: OVRTMP:OK
LSYN:OK KSYN:OK
MN-CDM570A
Revision 3
PRG:OK
PRG:OK
PRG:OK