Comtech EF Data CDM-570A Installation And Operation Manual page 587

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Appendix N
M&C is accomplished as follows:
•
Selection – This is the function or command as it appears on the menu page.
• Hot Key – This is the letter or number assigned as the keystroke/mnemonic for execution of
a menu function or command.
Where this column specifies [RO], this means that this line item is a read-only
(informational) feature. No user input is available.
•
Description – This is the detailed explanation of the function or command. You are
instructed to take a specific action here:
o When you are instructed to "set" a feature, this means that you are prompted to type
the numerical value for that feature. Press [Enter] to execute configuration. User
guidance to "set" a value within a permitted range (from a minimum value to a
maximum value) is commonly provided in parentheses or brackets.
o When you are instructed to "select" a feature, this means that a numbered list of
choices is commonly provided. Type the number to execute your operational selection.
Press [Enter] to execute configuration.
o When you are instructed to "toggle" a feature, this generally means that pressing the
Hot Key executes one of two operating states for that feature (e.g., Enabled or Disabled,
On or Off, Auto or Manual, etc.). The feature line will dynamically update to display, in
brackets, its updated and current operating state.
N–3
MN-CDM570A
Revision 3