Comtech EF Data CDM-570A Installation And Operation Manual page 209

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Ethernet-based Remote Product Management
Enter a value, in seconds, from 1 to 600.
•
IGMP Maximum Response Time – This is the maximum response time inserted into the
periodic general queries. By varying the Query Response Interval, a modem administrator
may tune the "burstiness" of IGMP messages on the subnet; note that larger values make
the traffic less "bursty" as host responses are spread out over a large interval.
Enter a value, in seconds, from 1 to 30.
The number of seconds assigned to the Query Response Interval must be less
than the Query Interval.
Click [Submit] to save.
IGMP Table
This read-only table displays the Multicast Routes that are active on the modem.
Click [Refresh] to update this section with its latest available information.
Make sure to also click [Save PaP Parameters] on the 'Admin | PaP Save' page before
proceeding further.
7–37
MN-CDM570A
Revision 3