Figure 9-47. Unit Information - Comtech EF Data CDM-570A Installation And Operation Manual

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Optional Packet Processor - Serial/Telnet CLI Operation
9.3.10.1 Operations and Maintenance > Unit Information
Open the Unit Information page from the Operations and Maintenance page.
Info Set Item
1 System time
Temperature
Image # that the Packet Processor
is currently booted from
Image # that the base modem is
2
currently booted from.
PARAM file that the Packet
Processor is currently configured
from
3 Currently Loaded Packet Processor
and Base Modem firmware:

Figure 9-47. Unit Information

Boot
•
IP Bulk #1
•
IP Bulk #2
•
EVENTLOG
•
PARAM
•
BaseBoot
•
Base Bulk #1
•
Base Bulk #2
•
Description
DAY MONTH DATE TIME (hh:mm:ss) YEAR
Displays, in degrees Celsius, the unit temperature.
By default displays Latest, unless "Packet Processor Boot
From" is set to Image #1 or Image #2
By default displays Latest, unless "Base Modem Boot From" is
set to Image #1 or Image #2
Displays PARAM file from Flash or Factory Default if no
parameter file is found in flash memory.
• Displays Build Date, CEFD FW#, Revision #, and size of
each Packet Processor and Base Modem firmware file:
• Boot file for the Packet Processor and the Base Modem.
• Bulk file contains all of the SW files for the Packet
Processor and Base Modem and there are two slots
available.
• Displays the date/time that the EVENTLOG file was last
updated.
• Displays the date/time that the PARAM1 file was last
updated. Also shows what user interface was used to last
update the PARAM file.
From CLI, displays 'console'
o
From Web, displays 'http'
o
From Telnet, displays the Telnet user login name
o
From SNMP, displays 'snmp'
o
9–63
MN-CDM570A
Revision 3