CDM-570A/570AL Satellite Modem with Optional Packet Processor
Rear Panel Connectors and Pinouts
3.2.2.2
10/100 Ethernet | Traffic 100 Port, RJ-45 (w/Optional Packet
Processor only)
This 8-pin RJ-45 modular port is present only if the optional High-Performance
Packet Processor is installed. Use a CAT5 cable to connect this port to an
Ethernet hub, router, switch, PC, etc. for Ethernet data traffic, M&C of base
modem and Packet Processor functions via Telnet/HTTP/ SNMP, and to
update the Packet Processor firmware.
Table 3-3. Typical Ethernet Port Pin Assignments
Pin #
1
2
3
4
5
6
7
8
Function
Tx+
Tx-
Rx+
N/C
N/C
Rx-
N/C
N/C
3–8
MN-CDM570A
Revision 3
Need help?
Do you have a question about the CDM-570A and is the answer not in the manual?
Questions and answers