Table 1-7 Dial Tone Detection Program Interaction - NEC UNIVERGE SV8100 Features & Specifications Manual

Issue 5.0
Program
Number
21-01-06

Table 1-7 Dial Tone Detection Program Interaction

Method
Press a line key
- or -
Dial 805+ Trunk
number
Dial a Trunk
Group code
- or -
Automatically
through a feature
Operation
Dial Tone Detection is automatic if enabled in programming.
1 - 374
Program Name
System Options for Outgoing
Calls – Dial Pause at First Digit
14-02-05 14-02-11
0 0
0 1
1 0
1 1
0 0
0 1
1 0
1 1
Description/Comments
If Dial Tone Detection is disabled,
the system waits based on this
time before sending dialed digits.
If using Dial Tone Detection, this
time should be set longer than the
time set in Program 21-01-05,
otherwise, if this time is set shorter
than Program 21-01-05, Dial Tone
Detection is satisfied and Program
21-01-05 is disregarded (not
used).
Result if dial tone
not present . . .
Trunk hangs (does not disconnect)
Trunk hangs (does not disconnect)
Trunk drops
Trunk drops
Trunk hangs (does not disconnect)
Trunk reroutes after time-out
Trunk drops
Trunk reroutes after time-out
UNIVERGE SV8100
Assigned Data
0~64800 (seconds)
(default = 1 second)
Dial Tone Detection