NEC UNIVERGE SV8100 Features & Specifications Manual page 371

UNIVERGE SV8100
Program
Number
24-02-05
24-02-08
24-05-01
40-01-10
Department Call Forward
Program Name
System Options for Transfer –
Message Wait Ring Interval Time
System Options for Transfer –
Delayed Transfer Timer for All
Department Groups
Department Group Transfer
Target Setup
Department Group Call when the
Automated Attendant is
activated
Description/Comments
For Single Line Telephones
(SLTs) without message waiting
lamps, this is the time between
intermittent ringing. If this value is
set to 0, the system rings once.
Determine the time a call should
ring a Department Group before
transferring the call.
Assign the Speed Dial bin to each
Department Group to hold the
destination for the immediate
automatic transfer of ICM and
transferred calls to the Department
Group feature.
Used to enable or disable
Department Group Call when the
Automated Attendant is activated.
Issue 5.0
Assigned Data
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 10 seconds)
0~1999
(default = 1999)
0 = Disabled (Off)
1 = Enabled (On)
(Default = 0)
1 - 361