NEC UNIVERGE SV8100 Features & Specifications Manual page 113

UNIVERGE SV8100
Program
Number
14-05-01
14-07-01
15-06-01
20-03-04
Automatic Route Selection
Program Name
Trunk Group – Trunk Group
Number
Trunk Access Map Setup
Trunk Access Map for
Extensions
System Options for Single Line
Telephones – Dial Sending Start
Time for SLT or ARS
Description/Comments
Program trunks of the same carrier
type into the same trunk group.
Set up the Trunk Access Maps.
This sets the access options for
trunks.
Assign Trunk Access Maps to
extensions.
When ARS or an analog extension
user accesses a trunk and dials an
outside call, the system waits this
interval before outdialing the first
digit.
Issue 5.0
Assigned Data
Trunks 1-200
Trunk Group 1-100
Priority - 1-200
(default = All trunks in
Trunk Group 1 with
priorities of:
Trunk 1 = Priority 1
Trunk 2 = Priority 2
Trunk 200 = Priority
200)
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
Trunk Access Maps:
1~200
(default = 1)
0~64800 (seconds)
(default = 3 seconds)
1 - 103