NEC UNIVERGE SV8100 Features & Specifications Manual page 937

UNIVERGE SV8100
Program
Number
13-07-04
13-08-01
13-09-01
13-10-01
15-19-01
15-19-02
Speed Dial – Telephone Book
Program Name
Telephone Book Dial Number
and Name – Group Number
Telephone Book System Name –
Telephone Book Name
Telephone Book Group Name –
Group Name
Telephone Book Routing –
Outgoing Mode
System Telephone Book Setup
for Extension – Telephone Book
1
System Telephone Book Setup
for Extension – Telephone Book
2
Description/Comments
Assign each entry in the telephone
book to a group if needed.
. In the telephone book you
can break it down further and
have specific groups to
search on. For example, you
could have sales, support,
personal, finance, etc.
groups to narrow your
search.
.
A name and number can be
assigned to an entry and
each entry can be assigned
to a group.
Assign a name to all 100
telephone books.
Assign a name to all 20 telephone
book groups per telephone book
(1-100).
Assign a trunk or ICM per
telephone book (1-100).
. If set to trunk, it follows the
stations trunk group routing
and you do not enter the
trunk access code in the
entries. If set to ICM, you
must enter the trunk access
code in front of the number
and it will follow the trunk
access code for routing.
Assign a station to the first
telephone book. A station can
have a maximum of two telephone
books assigned.
Assign a station to the second
telephone book. A station can
have a maximum of two telephone
books assigned.
Issue 5.0
Assigned Data
1~20
(default = 1)
Up to six characters
(default = no setting)
Up to 12 characters
Default:
1 = Group 01
2 = Group 02
3 = Group 03
:
:
:
20 = Group 20
0 = Trunk Outgoing
1 = Intercom Outgoing
(default = 0)
Up to eight digits
0~100
Default:
Port 1 : 1
Port 2 : 2
:
:
Port 100 : 100
Up to eight digits
0~100
(default = 0)
1 - 927