NEC UNIVERGE SV8100 Features & Specifications Manual page 630

Issue 5.0
Program
Number
10-03-18
10-03-19
10-03-20
10-03-21
10-39-01
14-05-01
1 - 620
Program Name
ETU Setup (PRTA PKG Setup) –
Type of Number
ETU Setup (PRTA PKG Setup) –
Numbering Plan Identification
ETU Setup (PRTA PKG Setup) –
Network Exchange Selection
ETU Setup (PRTA PKG Setup) –
PRI Number of Ports
Fractional Setup
Trunk Group – Trunk Group
Number
Description/Comments
Select the number type for the
ISDN circuit.
Select the Numbering Plan used
for the ISDN circuit.
Select the ISDN protocol for the
ISDN circuit.
Select the number of ports for the
PRI.
Use this to enable (1) or disable
(0) the T1/PRI fractional function.
Assign trunks to trunk groups then
go to Program 14-06-01 below to
set up Trunk Group Routing.
UNIVERGE SV8100
Assigned Data
0 = Unknown
1 = International
number
2 = National number
3 = Network Specific
number
4 = Subscriber number
5 = Abbreviated
number
(default = 2)
0 = Unknown
1 = ISDN numbering
plan
2 = Data numbering
plan
3 = Telex numbering
plan
4 = National standard
numbering plan
5 = Private numbering
plan
(default = 1)
0 = Standard (Same as
NI-2)
1 = reserved
2 = reserved
3 = DMS (A211)
4 = 5ESS
5 = DMS (A233)
6 = 4ESS
7 = NI-2
(default = 0)
0 = Auto
1 = 4 Ports
2 = 8 Ports
3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
(default = 0)
0 = Disable
1 = Enable
(default = 0)
Trunk Group Number:
0~100 Priority Number:
1~200 (default = Trunk
Group 1, with priority in
ascending order.)
ISDN Compatibility