Code Restriction In Credit - NEC UNIVERGE SV8100 Features & Specifications Manual

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

UNIVERGE SV8100

Toll Restriction In Credit allows an administrator to set a limit to the cost of outgoing calls calls made by

individual extensions.

When the cost limit is reached no further calls can be made from the extension until the restriction is

reset by the administrator. It is possible to allow the extension to make Toll Free calls if they are entered

in the Toll Restriction tables specified by the Dial Block class in Toll Restriction Dial Block.

This feature requires Advice of Charge (AOC) information to be provided by the Network supplier, there

are two types of AOC that can be sent by the network:

Sent during the call by the network supplier.

With this type of AOC the system will disconnect the outgoing call as soon as the cost limit is

reached and prevent further calls being made.

Sent at the end of the call by the network supplier.

With this type of AOC the system will not disconnect the call as soon as the limit is reached. The

user will be prevented making further calls once the limit is reached.

Not supported on analogue lines.

Advice of Charge must be provided by the network.

AOC-E will not disconnect the active call when the limit is reached.

Default Settings

No credit limits are set for any extension.

The Service code to set the credit limit is 774.

'Charging Cost Display' is disabled in Class of Service, this option must be enabled for the

administrator telephone only.

Code Restriction In Credit

Show Quick Links

Table of Contents