NEC UNIVERGE SV8100 Features & Specifications Manual page 956

Issue 5.0
Program
Number
35-01-07
35-01-08
35-02-01
35-02-02
35-02-03
35-02-04
35-02-05
35-02-06
35-02-07
35-02-08
35-02-09
1 - 946
Program Name
SMDR Options – Minimum Ring
Time (For Incoming Calls)
SMDR Options – Format
Selection
SMDR Output Options – Toll
Restricted Call
SMDR Output Options – PBX
Calls
SMDR Output Options – Trunk
Number or Name
SMDR Output Options –
Summary (Daily)
SMDR Output Options –
Summary (Weekly)
SMDR Output Options –
Summary (Monthly)
SMDR Output Options – Toll
Charge Cost
SMDR Output Options –
Incoming Call
SMDR Output Options –
Extension Number or Name
Description/Comments
Enter how long an unanswered
call must ring (1~65535 seconds)
before SMDR logs it as No
Answer). Enter 0 to allow all No
Answer calls to print.
This option is added to allow an
increased account code field from
eight to 16 when used in the U.K.
This allows 16 characters of the
Caller ID name to be displayed.
SMDR can include or exclude calls
blocked by Toll Restriction.
When the system is behind a PBX,
SMDR can include all calls or just
calls dialed using the PBX trunk
access code.
Select whether the system should
display the trunk name (0) or the
number (1) on SMDR reports.
.
If this option is set to 0,
Program 35-02-14 must be
set to 0.
Set this option to (1) to have the
SMDR report provide a daily
summary (at midnight every night).
Set this option to (1) to have the
SMDR report provide a weekly
summary (every Saturday at
midnight).
Set this option to (1) to have the
SMDR report provide a monthly
summary (at midnight on the last
day of the month).
Set this option to (1) have the
SMDR report include toll charges.
Enable this option (1) to have the
SMDR report include incoming
calls. If you disable this option (0),
incoming calls do not print.
Set this option (1) to have the
SMDR report include extension
numbers. Set this option (0) to
have the SMDR report include
extension names.
Station Message Detail Recording
UNIVERGE SV8100
Assigned Data
0~65535 (sec)
(0 = All)
(default = 0)
0 = NA Type (North
America)
1 = G/J Type
(Overseas/ Japan)
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)