NEC UNIVERGE SV8100 Features & Specifications Manual page 330

Issue 5.0
To exit a Conference without affecting the other parties:
Multiline Terminal
1. Hang up.
If you press Hold while on a call with two outside callers, the outside callers hear what is programmed in
.
Program 10-04-01.
Single Line Telephone
1. Hang up.
If you are not permitted to use Tandem Trunking, outside callers may hear Music on Hold.
.
To Barge-In to Conference Call:
1. Pick up the handset or press Speaker and dial the service code (default = 810).
If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the system
.
automatically places a Callback to the extension.
2. Dial the extension number or press a DSS key of a telephone within a Conference call.
When a new call is added to the conference, an intrusion tone is heard by all parties in the Conference,
.
depending on system programming, and all display multiline terminals show the joined party. If a Conference is
not possible:
the extension user hears a warning tone
o
the DISA user is rerouted to the defined ring group
o
- OR -
the Tie Line user hears a busy tone.
o
- OR -
The following steps are not available for DISA or Tie Line trunks:
1. Dial the extension number of the internal party.
2. Dial the single digit service code, if programmed.
Instead of the single digit service code, the service code 810 can also be dialed at this point.
.
To Transfer a Call into a Conference:
1. While on a call, press Hold.
2. Dial the Transfer to Conference service code (default = not assigned).
If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the system
.
automatically places a Callback to the extension.
The display shows the line Number, Number/Name and Extension Name/Number.
.
1 - 320
UNIVERGE SV8100
Conference