NEC UNIVERGE SV8100 Features & Specifications Manual page 401

UNIVERGE SV8100
Conditions
DID service must be purchased from your local telephone company.
DID Intercept for each DID number works for DID trunks with a trunk service type 3 in
Program 22-02. Other types of trunks may use the DID table, but the DID intercept feature
for each DID number is not yet supported.
When a call is transferred because of Call Forwarding No Answer, Call Forwarding Busy, or
DND, the reason for Transfer option can display to the transferred extension when the call
is ringing to their telephone.
DISA also allows outside callers to dial system extensions directly.
The Off-Hook Signaling provide DID calls with signaling options. Refer to Off-Hook
Signaling for specific details.
DID trunks do not ring external page speakers. Only trunks defined as normal in Program
22-02-01 ring external page speakers.
To simplify answering DID calls, assign function keys as line keys for the DID trunks.
SMDR can print trunk port names or received dialed number for ANI/DNIS or DID trunks. If
enabled, DNIS digits can be printed on the SMDR reports instead of the trunk name.
Transferred calls on DISA, DID, DIL, ISDN trunks, or from the VRS can display the reason
a call is being transferred (Call Forward, Busy, No Answer, or DND).
When defining trunks as DID or DID Mode in Program 22-02-01, DID translation (Program
22-11 or Program 22-17) must be used, even if the incoming digits match the extension
number.
When using DID Call by Time Schedule and breaking out the Time Patterns, set the start
time to 00:00 and end time to 00:00 for this feature to operate correctly. Refer to
by Time Schedule on page 1-389
DID Call by Time Schedule Priority is given to the pattern that is set manually. However,
when a time pattern changes with the time schedules set in Program 22-17, the pattern
applied by the Manual change is canceled and the Time Pattern is given priority
When Transfer Operation Mode is set to busy, call queuing must be turned off for it to work.
Default Setting
Disabled
Direct Inward Dialing (DID)
for more details.
Issue 5.0
DID Call
.
1 - 391