NEC UNIVERGE SV8100 Features & Specifications Manual page 250

Issue 5.0
Program
Number
22-08-01
23-03-01
82-08-01
Operation
To answer an incoming trunk call:
1. Lift the handset.
To use Universal Answer to answer a call ringing over the Paging system:
1. Go off-hook.
Depending on system programming, this may answer the call and you can skip Step 2.
.
2. Dial 872.
1 - 240
Program Name
DIL/IRG No Answer Destination
Universal Answer/Auto Answer
Sidetone Volume Setup
Description/Comments
If an incoming trunk call rings
longer than the DIL No Answer
Time (Program 22-01-04), it routes
to the destination you specify in
this option. Determine if the
destination should be a Ring
Group, In-Skin/External Voice
Mail, or Central Voice Mail.
Use this program to let an
extension user automatically
answer trunk calls that ring other
extensions. When the user lifts the
handset, they automatically
answer the ringing calls based on
Trunk Group Routing
programming (defined in Program
14-06).
Use this program to adjust of the
multiline terminal side tone
volume. There are two levels,
based on whether the connected
trunk is a digital trunk or analog
trunk.
Central Office Calls, Answering
UNIVERGE SV8100
Assigned Data
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or InMail)
(default = 1)
Maximum eight digits
Day/Night Mode
1~8
Route Table Number
0~100
(default = 0)
Input (0 ~ 9)
Digital Sidetone Level
(second column)
Analog Sidetone Level
(third column)
0 -54 (dB) -54 (dB)
1 -48 (dB) -54 (dB)
2 -42 (dB) -54 (dB)
3 -36 (dB) -48 (dB)
4 -30 (dB) -42 (dB)
5 -24 (dB) -36 (dB)
6 -18 (dB) -30 (dB)
7 -12 (dB) -24 (dB)
8 -12 (dB) -18 (dB)
9 -12 (dB) -12 (dB)