NEC UNIVERGE SV8100 Features & Specifications Manual page 889

UNIVERGE SV8100
Program
Number
15-03-05
15-03-06
15-03-07
15-03-08
15-03-09
15-03-10
15-03-11
15-03-14
20-03-01
Single Line Telephones
Program Name
Single Line Telephone Basic
Data Setup – Trunk Polarity
Reverse
Single Line Telephone Basic
Data Setup – Extension Polarity
Reverse
Single Line Telephone Basic
Data Setup – Enabled On-Hook
When Holding (SLT)
Single Line Telephone Basic
Data Setup – Answer On-Hook
when Holding (SLT)
Single Line Telephone Basic
Data Setup – Caller ID Function -
For External Module
Single Line Telephone Basic
Data Setup – Caller ID Name
Single Line Telephone Basic
Data Setup – Caller ID Type
Single Line Telephone Basic
Data Setup – Forwarded Caller ID
Display Mode
System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode
Description/Comments
Do Not Change Default Entry as
DTMF issues may arise with voice
mail.
Do Not Change Default Entry as
DTMF issues may arise with voice
mail.
Used to enable or disable Enabled
On-Hook When Holding for SLT
terminals.
Used to enable or disable Answer
ON-Hook when Holding for SLT
terminals.
Enable (1) or disable (0) the Caller
ID FSK signal for an external
Caller ID module or a 3rd party
vendor telephone with Caller ID
display.
Important:
If voice mail is used, this setting
must be disabled for the system
integration codes to be correct.
With a DTMF set (no Caller ID)
installed, this must be set to 0 for
incoming callers to have a talk
path.
Determine if an extension user
telephone should display the
Caller ID name.
Determine whether the Caller ID
type is FSK or DTMF.
Determine what the display shows
when a multiline terminal receives
a forwarded outside call.
For a busy single line telephone,
set the mode used to answer a
camped-on trunk call.
For ESL sets, enabling this option
(1) allows the user to dial Service
Code for Voice Mail Conversation
Record.
Issue 5.0
Assigned Data
0 = Off
1 = On
(default = 0)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0 = No
1 = Yes
(default = 1)
0 = Disable
(No)
1 = Yes
(Enable)
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = FSK
1 = DTMF
(default = 0)
0 = Calling Extension
Number (Calling)
1 = External Caller ID
(Forward)
(default = 0)
0 = Hookflash
(Hooking)
1 = Hookflash +
Service Code 894
(default = 0)
1 - 879