NEC UNIVERGE SV8100 Features & Specifications Manual page 262

Issue 5.0
Program
Number
15-13-02
20-02-06
20-02-09
20-06-01
20-07-12
20-08-02
20-13-13
21-01-15
21-01-16
1 - 252
Program Name
Loop Key - Incoming
System Options for Multiline
Telephones – Preselection Time
System Options for Multiline
Telephones – Disconnect
Supervision
Class of Service for Extensions
Class of Service Options
(Administrator Level) – Trunk
Port Disable
Class of Service Options
(Outgoing Call Service) – Trunk
Outgoing Calls
Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
System Options for Outgoing
Calls – Outgoing Disable on
Incoming Line (Toll Restriction)
System Options for Outgoing
Calls – Supervise Dial Detection
Timer
Description/Comments
Used to define an incoming loop
key
Set the preselection time When a
multiline terminal user preselects a
line key, the system remembers
the preselection for this time.
Use this option to enable (1) or
disable (0) disconnect supervision
for the system trunks.
Assign a Class of Service (1~15)
to extensions.
Turn Off (0) or On (1) the
extension ability to use the Trunk
Port Disable feature.
Turns off (0) or on (1) outgoing
trunk calling for the extension.
Turn Off (0) or On (1) the
extension ability to use Continued
Dialing, which allows DTMF signal
sending while talking on
extension.
Enable or Disable the Outgoing
Disable on Incoming Line feature.
With the Outgoing Disable on
Incoming Line feature, if dial tone
is not detected after the extension
answers an incoming line, the
system determines the call is
unable to complete and releases
the DTMF receiver.
Central Office Calls, Placing
UNIVERGE SV8100
Assigned Data
0~100(0 = Assigns
Loop Key to all Trunk
Groups
1~100 = Assigns Loop
Key to specified Trunk
Group
0~64800 (seconds)
(default = 5 seconds)
0 = Disable
1 = Enable
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Disable
1 = Enable
(default = 0)
0~64800 (seconds)
(default = 20 seconds)