NEC UNIVERGE SV8100 Features & Specifications Manual page 792

Issue 5.0
3. Press Speaker to hang up.
If not picked up, the call recalls to you.
- OR -
1. At the multiline terminal or 2-button telephone, press Hold.
- OR -
At a single line telephone, hookflash.
2. Dial 831 and the Park orbit (01~64).
If you hear busy tone, the orbit is busy. Try another orbit.
If you hear a busy tone, the orbit is busy. Dial 831
to search for an idle park location in ascending order.
3. Use Paging to announce the call.
4. Press Speaker to hang up.
If not picked up, the call recalls to you.
The parked call recalls after the Park Hold Time (Program 24-01-06). The call rings the extension to which it
recalled for the Hold Recall Callback Time (Program 24-01-02). The call then goes on Hold for the Park Hold
Time, then recalls again for the Hold Recall Callback Time. The call continues to cycle between Hold and recall
until the extension user answers the call or the outside party hangs up.
To pick up a parked call:
1. Lift the handset.
2. Press the Park key (Program 15-07 or SC 852: *04 + orbit).
- OR -
1. At the multiline terminal or 2-button telephone, press Speaker.
- OR -
At single line telephone, lift the handset.
2. Dial 861 and the Park orbit (01~64).
To park a call at your extension:
1. Do not hang up.
1 - 782
*
if enabled in Program 20-11-27 (Call Park AutoSearching)
UNIVERGE SV8100
Park