NEC UNIVERGE SV8100 Features & Specifications Manual page 710

Issue 5.0
Callback to Cell Phone
Program
Number
13-04-01
13-04-03
13-04-04
14-01-30
15-22-01
15-22-03
1 - 700
Program Name
Speed Dialing Number and Name
– Speed Dialing Data
Speed Dialling Number and
Name - Transfer Mode
Speed Dialling Number and
Name - Transfer Destination
Number
Basic Trunk Data Setup –
Flexible Ringing By Caller ID
Mobile Extension Setup – Mobile
Extension Target Setup
Mobile Extension Setup – Trunk
Access Code
Description/Comments
For the bin number defined in
Program 15-22-01 for the Mobile
Extension, enter the external
number of the Mobile Extension.
This must exactly match the Caller
ID number of the Mobile Extension
or the user cannot access the
internal features.
When the incoming caller ID
matches the number programmed
in the speed dial bin, this setting
determines the destination of the
call.
When the incoming caller ID
matches the number programmed
in the speed dial bin, this setting
determines the destination of the
call.
Set up the transfer destination
number or the IRG number.
Enable/Disable Flexible ringing on
each trunk port base.
For each Mobile Extension
number, select the Abbreviated
Dial bin number to be associated
with it.
Select if the Normal (0) or
Individual (1) Trunk access is used
when making the call to the mobile
number.
UNIVERGE SV8100
Assigned Data
*
#
1~9, 0, ,
Pause (Press line key
1)
Recall/Flash (Press
line key 2)
@ = Code to wait for
answer supervision in
ISDN (Press line key 3)
(maximum 24 digits)
(default not assigned)
0 = Not Used
1 = Internal Dial
2 = Incoming Ring
Group (IRG)
(default = 0)
If Transfer mode is
(Refer to 13-04-03):
1 = Internal Dial Mode
1~9, 0, *, #, P, R, @
(Maximum 24
characters)
2 = Incoming Ring
Group
0~100 (IRG Number)
P=Pause R=Recall
@=Additional Digits
when using ISDN
functionality
(default not assigned)
0 = Disable (No)
1 = Enable (Yes)
(default = 1)
0~1999
(0 = No setting
1~1999 = target of
mobile extension)
(default = 0)
0 = Use normal trunk
access code (Program
11-09-01)
1 = Use individual trunk
access code (Program
11-09-02)
(default = 0)
Mobile Extension