NEC UNIVERGE SV8100 Features & Specifications Manual page 19

UNIVERGE SV8100
5. Dial the number you want to call.
To dial an outside number and let your system tell you when a Forced Account Code is required:
1. Access a trunk and dial the number you want to call.
2. Wait for your call to go through.
- OR -
3. If you hear "Please enter an Account Code," (depending on system programming) and your
display shows ENTER ACCOUNT CODE.
*
Dial .
o
- OR -
Press your Account Code key (
Dial your Account Code (3~16 digits, using 0~9 and #).
o
If Account Codes are hidden, each digit you dial shows an
*
Dial .
o
- OR -
Press your Account Code key (
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out onto the connected trunk.
.
*
2. Dial .
3. Enter the Account Code (1~16 digits).
You can enter any code of the proper length.
.
*
4. Dial .
To enter a Forced Account Code at a single line telephone:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for more information.
.
With Forced Account Codes, you hear, "Please enter an Account Code."(depending on programming).
.
*
2. Dial .
3. Enter Account Code (3~16 digits).
*
4. Dial .
5. Dial number you want to call.
Account Code – Forced/Verified/Unverified
Program
15-07-01 or SC 851: code 50).
Program
15-07-01 or SC 851: code 50).
*
on the telephone display.
Issue 5.0
1 - 9