NEC UNIVERGE SV8100 Features & Specifications Manual page 761

UNIVERGE SV8100
Program
Number
20-13-13
20-15-01
20-15-03
20-15-05
80-03-01
80-03-02
(OPX) Off-Premise Extension
Program Name
Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
Ring Cycle Setup – Normal
Incoming Call on Trunk
Ring Cycle Setup – Incoming
Internal Call
Ring Cycle Setup – DID/DDI
DTMF Tone Receiver Setup –
Detect Level
DTMF Tone Receiver Setup –
Start Delay Time
Description/Comments
Turn Off (0) or On (1) the
extension ability to use Continued
Dialing, which allows DTMF signal
sending while talking on
extension.
Used to define the ring cycle for
INcoming Internal calls.
Use to define the incoming internal
call ringing cycles for each ring
type.
Used to define the ring cycle for
DID/DDI calls.
Use Items 11~32 to set the criteria
for dial tone detection for outgoing
ARS calls.
Use this option to define the start
delay time for DTMF Tone
Receiver.
Issue 5.0
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 12)
Ringing Cycle = 1~13
(default = 8)
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
default:
Type 1~5 = 0
0~255
(0.25 ms ~ 64 ms)
default:
Type 1~5 = 0
1 - 751