NEC UNIVERGE SV8100 Features & Specifications Manual page 182

Issue 5.0
Program
Number
11-11-27
13-01-01
13-04-01
14-01-04
14-01-05
14-06-01
1 - 172
Program Name
Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
Speed Dialing Function Setup –
Speed Dialing Auto Outgoing
Call Mode
Speed Dialing Number and Name
– Speed Dialing Data
Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
Basic Trunk Data Setup –
Receive Gain Level for
Conference and Transfer Calls
Trunk Group Routing – Priority
Order Number
Description/Comments
Customize the service code to be
used to set the destination for the
Automatic Trunk Forwarding
feature for a Department Group.
Determine if dialing an Speed
Dialing number will dial an outside
number (seizing a trunk as
assigned in Program 13-05) or an
Intercom number (0 = Trunk
Dialing Mode, 1 = Extension
Dialing Mode).
Enter the Common and Group
Speed Dialing numbers and
names which are to be used for
Trunk-to-Trunk Forwarding.
CODEC gain set at 0 dB [Program
14-01-04 = 32 (CODEC Gain Type
2)] can be used to set the transmit
CODEC gain type for multiline
Conference or transferred calls.
CODEC gain set at 0 dB [Program
14-01-04 = 32 (CODEC Gain Type
2)] can be used to set the transmit
CODEC gain type for multiline
Conference or transferred calls.
Used to set the priority order
number 1~4.
Call Forwarding, Off-Premise
UNIVERGE SV8100
Assigned Data
MLT
(default = 704)
0 = Trunk Outgoing
Mode
1 = Intercom Outgoing
Mode
(default = 0)
*
#
1~9, 0, ,
Pause (Press line key
1)
Recall/Flash (Press
line key 2)
@ = Code to wait for
answer supervision in
ISDN (Press line key 3)
(maximum 24 digits)
(default not assigned)
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 16 (-8dB)]
0 = Not Specify1~100 :
(Trunk Group
Number)1001~1100 :
(1000 + Route Table
Number)
Default:
Route 1, Order
Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified).