NEC UNIVERGE SV8100 Features & Specifications Manual page 245

UNIVERGE SV8100
Program
Number
14-06-01
14-07-01
15-01-05
Central Office Calls, Answering
Program Name
Trunk Group Routing – Priority
Order Number
Trunk Access Map Setup
Basic Extension Data Setup –
Restriction for Outgoing Disable
on Incoming Line
Description/Comments
Used to set the priority order
number 1~4.
Set up the Trunk Access Maps.
This sets the access options for
trunks. Ring Group programming
overrides Access Map
programming.
Enable or disable supervised dial
detection for an extension.
Issue 5.0
Assigned Data
0 = Not Specify1~100 :
(Trunk Group
Number)1001~1100 :
(1000 + Route Table
Number)
Default:
Route 1, Order
Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified).
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
0 = No
1 = Yes
(default = 0)
1 - 235