NEC UNIVERGE SV8100 Features & Specifications Manual page 966

Issue 5.0
Guide to Feature Programming
Program
Number
11-11-22
15-01-01
15-07-01
20-06-01
20-13-21
Operation
To program your extension name:
1. Press Speaker.
2. Dial 800.
- OR -
Press the Extension Name Change key (Program 15-07 or SC 851: 55).
3. Press Hold.
4. Enter the name. (Refer to
Your name can be up to 12 digits maximum.
.
1 - 956
Program Name
Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
Basic Extension Data Setup –
Extension Name
Programmable Function Keys
Class of Service for Extensions
Class of Service Options
(Supplementary Service) –
Extension Name
Table 1-17 Selectable Display Messaging Defaults on page
Description/Comments
Use to customize the extension
name programming used for
registration and setup.
Define the extension/virtual
extension name.
Assign an Extension Name
Change key (55) to extensions.
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) an
extension user ability to program
its name.
Station Name Assignment – User Programmable
UNIVERGE SV8100
Assigned Data
MLT
(default = 800)
Up to 12 characters
Default:
STA 200 = Ext 200
STA 201 = Ext 201,
etc.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
1-861.)