NEC UNIVERGE SV8100 Features & Specifications Manual page 35

UNIVERGE SV8100
System Information
slot location
17 3-1
18 3-2
19 3-3
20 3-4
21 3-5
22 3-6
23 3-7
24 3-8
Conditions
Alarm Reports and System Information Reports can be output to a USB stick on the
CD-CP00.
The UNIVERGE SV8100 supports the following Alarms to be output to the LCD of a
multiline terminal:
SMDR Buffer Full
o
CD-CP00-LAN link Error
o
The UNIVERGE SV8100 does not support printouts of the following Alarms:
Power Failure
o
RAM Backup Battery Error
o
Networking Keep Alive Error
o
Up to 12 System Alarm times can be scheduled to print on a Monthly, Daily, and Hourly time
frame. The report indicates both Major and Minor Alarms.
System Information Reports cannot be set to output at a scheduled time.
When using the E-mail functionality of reports, the E-mail address in Program 90-11-10
(From Address) must be set for the E-mail feature to work.
Once output of new alarms is performed, these same alarms are not output a second time.
New alarms must be generated before Program 90-12-04 can be performed a second time.
Up to 100 System Alarm Reports can be stored. When the buffer fills, the oldest record is
Alarm Reports
Table 1-4 Sample System Information Printout (Continued)
type assign port
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
05/18/2006 11:02
condition
Issue 5.0
note
1 - 25