NEC UNIVERGE SV8100 Features & Specifications Manual page 460

Issue 5.0
Program
Number
15-08
15-10-01
20-13-49
20-15-01
20-15-02
20-15-03
20-15-04
20-15-05
20-15-06
20-15-07
20-15-08
20-15-09
20-15-10
1 - 450
Program Name
Incoming Virtual Extension Ring
Tone Setup
Incoming Virtual Extension Ring
Tone Order Setup
Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Ring Cycle Setup – Normal
Incoming Call on Trunk
Ring Cycle Setup – PBX, CES
Incoming Call
Ring Cycle Setup – Incoming
Internal Call
Ring Cycle Setup – DID/DISA/
VRS
Ring Cycle Setup – DID/DDI
Ring Cycle Setup – Dial-In in the
E&M Tie Line
Ring Cycle Setup – Door Box
Ringing for SLT
Ring Cycle Setup – Virtual
Extension Ring
Ring Cycle Setup – Callback
Ring Cycle Setup – Alarm for
SLT
Description/Comments
Use to assign a ring tone range
(0~4) to incoming virtual
extensions assigned to a Virtual
Extension key (Program 15-07).
When two or more virtual
extensions are set on a function
key on the telephone, and the tone
pattern by which the sound of
each extension differs, the priority
of ring sound is set up.
Determine if a BLF of the station
will light when a Normal CO call is
ringing the phone.
Used to define the ringing cycle for
Normal Incoming Trunk calls.
Used to define the ringing cycle for
PBX, CES incoming calls.
Used to define the ringing cycle for
incoming Internal Calls.
Used to define the ringing cycle for
DID/DISA/VRS Calls.
Used to define the ringing cycle for
DID/DDI calls.
Used to define the ringing cycle for
Dial-In and E&M Tie Line calls.
Used to define the ringing cycle for
Door Box ringing for SLT.
Used to define the ringing cycle for
Virtual Extension Ringing.
Used to define the ringing cycle for
Callback.
Used to define the ringing cycle for
Alarm for SLT.
Distinctive Ringing, Tones and Flash Patterns
UNIVERGE SV8100
Assigned Data
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
(default = 0)
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
Order 1 Pattern 0 =
Pattern 1 (default)
Order 2 Pattern 1 =
Pattern 2 (default)
Order 3 Pattern 2 =
Pattern 3 (default)
Order 4 Pattern 3 =
Pattern 4 (default)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 12)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 12)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 11)
Ringing Cycle = 1~13
(default = 5)