NEC UNIVERGE SV8100 Features & Specifications Manual page 409

Hide thumbs Also See for UNIVERGE SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Number
25-06-02
25-07-01
25-07-02
25-07-04
25-07-05
25-07-06
25-07-11
Direct Inward Dialing (DID)
Program Name
VRS/DISA One-Digit Code
Attendant Setup – Destination
Number
System Timers for VRS/DISA –
VRS/DISA Dial Tone Time
System Timers for VRS/DISA –
VRS/DISA No Answer Time
System Timers for VRS/DISA –
Calling Time to Automatic
Answering Telephone Set
System Timers for VRS/DISA –
Duration Time for Guidance
Message by Automatic
Answering Telephone Set
System Timers for VRS/DISA –
Duration Time for Guidance
Message by ACI
System Timers for VRS/DISA –
VRS/DISA Answer Delay Time
Description/Comments
Set up single digit dialing for
Automated Attendant callers. For
each VRS Message programmed
to answer outside calls, specify:
The digit the Automated
Attendant caller dials (1~12,
*
where 10 = 0, 11 =
and 12 =
#
). (Keep in mind that if you
assign destinations to digits
three and four, outside callers
cannot dial system extensions
that begin with that digit.)
The destination reached (four
digits maximum) when the
caller dials the single digit
code.
After answering a VRS/DISA
trunk, the system waits this time
for the caller to dial the first digit of
the DISA password. If the caller
fails to dial in this time, the system
drops the call.
A VRS/DISA caller can ring an
extension for this time before the
system sets the call as a Ring No
Answer. After this time expires,
the call follows the programmed
Ring No Answer routing (set in
Program 25-03 and Program
25-04).
Set the answering waiting time of
the automatic answering
extension when an incoming DID
trunk call is received.
Set the announcement time of the
automatic answering extension
before an incoming DID trunk
caller is disconnected.
Set the announcement time by the
ACI before an incoming DID trunk
caller is disconnected.
Set the time the system waits after
receiving an incoming VRS/DISA
call before the system
automatically answers the call.
Issue 5.0
Assigned Data
Up to eight digits
(default not assigned)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 0 seconds)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 0 seconds)
1 - 399

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents