NEC UNIVERGE SV8100 Features & Specifications Manual page 226

Issue 5.0
Program
Number
20-20-01
20-20-02
20-20-03
90-03-01
90-04-01
Operation
Storing a Number
To store a Caller ID number in an Speed Dial bin:
1. With a multiline terminal in an idle condition the display shows:
1-01 FRI 09:00AM
301
LIST DIR ICM PROG
2. Press the LIST Softkey. The display shows:
LIST MENU
Redial CID
3. Press the CID Softkey (Caller ID). The display shows:
## :
xxxxxxxxxxxxx
mm-dd hh:mm
1 - 216
Program Name
Message Setup for Non-Caller ID
Data – Private Call
Message Setup for Non-Caller ID
Data – Call from Out of Service
Area
Message Setup for Non-Caller ID
Data – Call Information with
Error
Save Data
Load Data
STA 301
Description/Comments
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as a private
call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as an
out-of-service area call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as a call
with a CID error.
Use to save the programmed data
on the SRAM and Flash ROM to
the 16MB/32MB ATA removable
Compact Flash memory card.
Also, used to save stored Caller ID
if permanently saved with service
code #*#9 (11-15-03).
Use to load the system data from
the inserted Compact Flash
Memory to the SRAM and Flash
ROM in the system.
Also, used to load stored Caller ID.
UNIVERGE SV8100
Assigned Data
24 Alphanumeric
Characters
(default = PRIVATE)
24 Alphanumeric
Characters
(default = OUT OF
AREA)
24 Alphanumeric
Characters
(default = NO CALLER
INFO)
Dial 1 + press Hold
(Press Hold to cancel.)
Dial 1 + press Hold
(Press Hold to cancel.)
Caller ID