NEC UNIVERGE SV8100 Features & Specifications Manual page 730

Issue 5.0
Required Component(s)
None
Related Features
Directory Dialing
Single Line Telephones
Speed Dial – System/Group/Station
Guide to Feature Programming
Program
Number
11-11-22
14-01-01
15-01-01
20-09-02
20-13-21
20-13-47
1 - 720
Program Name
Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
Basic Trunk Data Setup – Trunk
Name
Basic Extension Data Setup –
Extension Name
Class of Service Options
(Incoming Call Service) – Caller
ID Display
Class of Service Options
(Supplementary Service) –
Extension Name
Class of Service Options
(Supplementary Service) –
Station Number Display
Description/Comments
Used to customize the service
code used to edit Extension Name
Programming.
Set the names for trunks. The
trunk name displays on a multiline
terminal for incoming and outgoing
calls.
Define the extension/virtual
extension name.
Turns Off (0) or On (1) the Caller
ID display at an extension.
Turns Off (0) or On (1) an
extension user ability to program
its name.
Determine if a station Number will
be displayed (On) or not displayed
(Off) in the LCD when the phone is
in an idle state.
UNIVERGE SV8100
Assigned Data
MLT
(default = 800)
Up to 12 Characters
Line 001
Line 002
Line 003
:
Line 200
Up to 12 characters
Default:
STA 200 = Ext 200
STA 201 = Ext 201,
etc.
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Name Storing