NEC UNIVERGE SV8100 Features & Specifications Manual page 306

Issue 5.0
Program
Number
21-05-06
21-05-07
21-05-08
21-05-09
21-05-10
21-05-11
21-05-12
21-05-13
21-06-01
1 - 296
Program Name
Toll Restriction Class – Common
Restriction Table
Toll Restriction Class – Permit
Code Table
Toll Restriction Class –
Restriction Table
Toll Restriction Class –
Restriction for Common Speed
Dials
Toll Restriction Class –
Restriction for Group Speed
Dials
Toll Restriction Class – Intercom
Call Restriction
Toll Restriction Class – PBX Call
Restriction
Toll Restriction Class –
Restriction of Tie Line Calls
Toll Restriction Table Data Setup
– International Call Restriction
Table
Description/Comments
It chooses whether the table set
up by Program 21-06-05 is
referred to, or not referred to.
Set the tables 1~4 when referring
to the table set up by Program
21-06-06.
Set the tables 1~4 when referring
to the table set up by Program
21-06-07.
For the Code Restriction Class
you select, enable (1) or disable
(0) Code Restriction for Common
Speed Dialing numbers.
For the Toll Restriction Class you
select, enable (1) or disable (0)
Code Restriction for Group Speed
Dialing numbers.
For the Toll Restriction Class you
select, enable (1) or disable (0)
Intercom Call Restriction. If
enabled, extensions cannot place
or receive Intercom calls.
For the Toll Restriction Class you
select, enable (1) or disable (0)
PBX Call Restriction.
Select whether or not the Toll
Restriction set up in Program
34-08-01 is enabled (1) or
disabled (0).
Enter the international dialing
codes you want to restrict.
UNIVERGE SV8100
Assigned Data
0 = Unassigned
1 = Assigned
Default:
1, 6~15 = 0
2~5 = 1
1~4 =Table
0 = Disable (None)
Default:
1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
1~4 =Table
0 = Disable (None)
Default:
1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
0 = Does Not Restrict
1 = Following
Restriction Check
(default =0)
0 = Does Not Restrict
1 = Following
Restriction Check
(default =0)
0 = Disable
1 = Enable
(default = 0)
1~4 =Table
0 = Disable (None)
Default:
1~6, 8~15 = 0
7 = 1
0 = Disable
1 = Enable
(default = 0)
Dial (Up to four digits)
default:
Tables 1 ~ 10 = No
Setting
Code Restriction In Credit