NEC UNIVERGE SV8100 Features & Specifications Manual page 689

UNIVERGE SV8100
To answer a Message Waiting:
.
When you have a message, your Message Waiting LED flashes fast for multiline terminals.
1. At the multiline terminal, press Speaker and dial 841.
- OR -
Press the Message Waiting key (Program 15-07 or SC 851: 38).
- OR -
At the single line telephone, lift the handset and dial 841.
If the called extension does not answer, dial 0 or press your Message Waiting key to automatically leave them a
.
message.
Normally, your Message Waiting LED goes out. If it continues to flash, you have new messages in your Voice
.
Mail mailbox or a new General Message. See "To check your messages" below.
To cancel all your Messages Waiting:
.
This includes messages you have left for other extensions and messages other extension have left for you.
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 873.
3. Hang up.
To cancel the Messages Waiting you have left at a specific extension:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 871.
3. Dial the number of the extension you do not want to have your messages.
4. Hang up.
Message Waiting
Issue 5.0
1 - 679