Flexible System Numbering - NEC UNIVERGE SV8100 Features & Specifications Manual

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

UNIVERGE SV8100

Flexible System Numbering lets you reassign the system port-to-extension assignments. This allows an

employee to retain their extension number if they move to a different office. In addition, factory

technicians can make comprehensive changes to your system number plan. You can have factory

technicians:

Set the number of digits in internal (Intercom) functions. For example, extension numbers can have

up to eight digits.

Change your system Service Code numbers.

Assign single digit access to selected Service Codes.

Talk to your sales representative to find out if this program is available to you.

You can also use Flexible System Numbering to change the system Trunk Group Routing code.

Although the default code of 9 is suitable for most applications, you can alter the code if needed.

The system provides a completely flexible system numbering plan. Refer to the chart below and the

UNIVERGE SV8100 Programming Manual for more details.

11-01-01 System Numbering

11-09-01 Trunk Access Code

11-20-01 Dial Extension Analyze Table

11-20-02 Dial Extension Analyze Table

Flexible System Numbering

Set the system internal (Intercom) numbering plan. The

numbering plan includes the digits an extension user

must dial to access features and other extensions.

Assign the single-digit trunk access code (normally 9).

This is the code users dial to access Automatic Route

Selection or Trunk Group Routing.

Use tables 01 ~ 128 to assign the digits to be dialed using

the Dial Extension Analyze Tables. These tables are used

when Program 11-01-01 is set to option 9 = Dial Extension

(Up to eight digits can be assigned and the valid entries are:

Assign the Type of Dial for the Dial Extension Analyze Table

from Program 11-20-01.

(Svc Code, Intercom, Operator, or F-Route)

Show Quick Links

Table of Contents