NEC UNIVERGE SV8100 Features & Specifications Manual page 471

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
10-03-01
(1)
10-03-06
10-05-01
11-12-36
15-07-01
32-01-01
Door Box
Program Name
ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
ETU Setup (DLCA PKG Setup) –
Terminal Type (B2)
General Purpose Relay Setup –
Slot No. Physical Port of DLCA
Sensor Circuit No.
Service Code Access (for
Service Access) – Door Box
Access
Programmable Function Keys
Door Box Timers – Door Box
Answer Time
Description/Comments
Use to setup and confirm the
Basic Configuration data for
terminal type (B1).
Use to setup and confirm the
Basic Configuration data for
terminal type.
For DLC package support, set the
terminal type to 8 [PGD (for Door
Box)]. First set 10-03-01 to 0 with
no device plugged into that port,
then plug the device in and the
system should recognize it as a
door box and then set Program
10-03-06.
Define which Relay circuits (5~8)
on a PGD(2)-U10 ADP Adapter
are used for General Purpose
Relay.
If the service code for Doorphone
Access is not acceptable, change
it here.
Assign a function key for External
Call Forward by Doorphone (Code
54).
Set the time a user has to answer
the Door Box chimes.
Issue 5.0
Assigned Data
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0))
0 = Not set
6 = PGD(2)-U10 ADP
(Paging)
7 = PGD(2)-U10 ADP
(Tone Ringer)
8 = PGD(2)-U10 ADP
(Door Box)
9 = PGD(2)-U10 ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
Slot No: 0~24
DCLA Port: 0~16
Relay No: 0, 5~8
. After each entry,
pressing the
Transfer Key
advances to the
next entry.
(default = 0 - 0 - 0)
MLT, SLT
(default = 802)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
0~64800 (seconds)
(default = 30 seconds)
1 - 461