NEC UNIVERGE SV8100 Features & Specifications Manual page 907

UNIVERGE SV8100
Program
Number
20-11-24
20-11-25
20-12-02
20-12-03
20-13-01
20-13-02
20-13-03
20-13-04
20-13-05
20-13-06
SLT Adapter
Program Name
Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
Class of Service Options
(Charging Cost Service) –
Advice of Charge
Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Outgoing)
Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Description/Comments
Set the hold type when a trunk call
is put on hold by an extension.
Turn on or off an extensions ability
to transfer a parked call.
ISDN-AOC
This option turns off (0) or on (1) a
DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
ISDN billing information.
Turns Off (0) or On (1) the
Warning Tone for Long
Conversation (not for single line
telephones).
Turn off or on an extension ability
to use Long Conversation Cutoff
for incoming calls.
Turn off or on an extension ability
to use Long Conversation Cutoff
for outgoing calls.
Turn On or Off the ability to use
Call Forwarding/DND Override.
Turn On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
Allows a busy extension ability to
manually (0) or automatically (1)
receive Off-Hook signals.
Issue 5.0
Assigned Data
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
1 - 897