NEC Corporation reserves the right to change the specifications, functions, or features at any time without notice. NEC Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Corporation and shall not be reproduced without prior written approval of NEC Corporation.
Installing the Headset Adapter Prior to connecting the EHS cable, disconnect/power off the DT700/DT300 Connect the EHS cable to the mic and indicator. Mic : Used to detect ring tone from DT700/300. If detected, the headset duplicates the ringtone sound. Indicator : Displays the status of talking with headset.
Paste the mic to the DT300/DT700 speaker Connect the EHS cable to the Base Unit Finally, reconnect the DT700/300 to the SV8100 and power on the Base Unit.
Configuring the Telephone System Configuring the Telephone System The EHS interface emulates an 8LK module. To allow the Plantronics interface control over the headset function, it is necessary to program a headset function key (05) on the first key of the 8LK interface using programming command 15-07.
Using the Headset Your extension is automatically in the Headset Mode when your headset is removed from its base. There is no need to have a Headset Feature Key or dial Service Code 798 to turn the Headset Mode on and off.
Declaration of conformity Hereby, NEC Unified Solutions, declares that the SL1100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the Declaration of Conformity, visit: http://www.nec-unified.com/doc PRODUCT DISPOSAL INFORMATION For Countries in the European Union The symbol depicted here has been affixed to your product to inform you that electrical and electronic products should not be disposed of as municipal waste.