NEC UNIVERGE SV8100 Features & Specifications Manual page 853

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
20-06-01
20-08-01
20-08-09
21-01-09
21-11-01
Operation
To place a call if your extension has ringdown programmed:
1. Lift the handset.
Ringdown Extension (Hotline), Internal/External
Program Name
Class of Service for Extensions
Class of Service Options
(Outgoing Call Service) –
Intercom Calls
Hotline
System Options for Outgoing
Calls – Ringdown Extension
Timer (Hotline Start)
Extension Ringdown (Hotline)
Assignment
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turns Off or On Intercom calling
for the extension.
Turns Off or On Hotline feature for
th eextension
After the user lifts the handset, the
extension automatically calls the
ringdown destination after this
interval (0~64800 seconds). A
setting of 0 immediately rings the
programmed extension. Any other
setting delays the ringdown the
number of seconds programmed.
Program the ringdown (Hotline)
source and destination (target)
number, up to 24 digits (512
Hotline assignments). Remember
to include the trunk access code
(usually 9) in front of the number
when dialing outside numbers.
When programming Speed Dial –
System numbers as the
destination, the entry should be
853 + bin number (the service
code for Speed Dialing and the
Speed Dial bin number).
Issue 5.0
Assigned Data
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 seconds
(default = 5 seconds)
*
#
0, , , Pause, Hook
Flash,
@ (Code to wait for
answer supervision)
(maximum 24 digits)
(default not assigned)
1 - 843