NEC UNIVERGE SV8100 Features & Specifications Manual page 519

UNIVERGE SV8100
Program
Number
11-11-17
11-11-18
11-11-19
11-11-20
11-11-21
11-11-22
11-11-23
11-11-24
11-11-25
11-11-26
11-11-27
11-11-28
Flexible System Numbering
Program Name
Service Code Setup (for Setup/
Entry Operation) –
Programmable Function Key
Programming (2-Digit Service
Codes)
Service Code Setup (for Setup/
Entry Operation) – BGM On/Off
Service Code Setup (for Setup/
Entry Operation) – Key Touch
Tone On/Off
Service Code Setup (for Setup/
Entry Operation) – Change
Incoming CO and ICM Ring
Tones
Service Code Setup (for Setup/
Entry Operation) – Check
Incoming Ring Tones
Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
Service Code Setup (for Setup/
Entry Operation) – Second Call
for DID/DISA/DIL
Service Code Setup (for Setup/
Entry Operation) – Change
Station Class of Service
Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Setup for Each
Extension
Group
Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Cancellation for Each
Extension Group
Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer for Every Extension
Group
Description/Comments
Use this option to set the service
code (default 751) to assign 2-digit
function codes to the Function
keys.
Use to customize the BGM On/Off
used for registration and setup.
Use to customize the key touch
tone Off/On used for registration
and setup.
Use to customize the change
incoming CO and ICM ring tones
used for registration and setup.
Use to check incoming ring tones
used for registration and setup.
Use to customize the Extension
name programming used for
registration and setup.
Use to customize the second call
of DID/DISA/DIL used for
registration and setup.
Allows an extension user to
change the COS of another
extension. Must be allowed in
Program 20-13-28.
Customize the service code to be
used to set the Automatic Trunk
Forwarding feature for a
Department Group.
Customize the service code to be
used to cancel the Automatic
Trunk Forwarding feature for a
Department Group.
Customize the service code to be
used to set the destination for the
Automatic Trunk Forwarding
feature for a Department Group.
Use to customize the delayed
transfer for every extension group
used for registration and setup.
Issue 5.0
Assigned Data
MLT
(default = 851)
MLT
(default = 825)
MLT
(default = 824)
MLT
(default = 820)
MLT
(default = 811)
MLT
(default = 800)
MLT
(default = 779)
MLT
(default = 777)
MLT, SLT
(default = 702)
MLT, SLT
(default = 703)
MLT
(default = 704)
MLT, SLT
(default = 705)
1 - 509