NEC UNIVERGE SV8100 Features & Specifications Manual page 878

Issue 5.0
Guide to Feature Programming
Program
Number
11-11-20
11-11-21
15-02-02
15-02-03
15-08-01
1 - 868
Program Name
Service Code Setup (for Setup/
Entry Operation) – Change
Incoming CO and ICM Ring
Tones
Service Code Setup (for Setup/
Entry Operation) – Check
Incoming Ring Tones
MultiLine Telephone Basic Data
Setup – Trunk Ring Tone
Multiline Telephone Basic Data
Setup – Extension Ring Tone
Incoming Virtual Extension Ring
Tone Setup
Description/Comments
If required, change the service
code used for changing the
incoming ring tones heard for CO
and ICM calls.
If required, change the service
code used for checking how the
incoming ring tones sound.
Use this option to set the tone
(pitch) of the incoming trunk ring
for the extension port you are
programming.
Use this option to set the tone
(pitch) of the incoming extension
call ring for the extension port you
are programming. Also refer to
program 15-08.
When an extension or a virtual
extension is assigned to the
function key on the key telephone,
select the ring tone when receiving
a call on that key.
For ACD CAR keys, only tone
pattern 1 (entry 0) can be used.
The remaining patterns are not
checked with this feature.
UNIVERGE SV8100
Assigned Data
MLT
(default = 820)
MLT
(default = 811)
1 = High
2 = Medium
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
(default = 2)
1 = High
2 = Medium
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
(default = 8)
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
4 = Incoming Ring
Tone Extension
(default = 0)
Selectable Ring Tones