NEC UNIVERGE SV8100 Features & Specifications Manual page 692

Issue 5.0
Related Features
Handsfree Answerback/Forced Intercom Ringing
Handset Mute
Programmable Function Keys
Guide to Feature Programming
Program
Number
15-07-01
20-02-11
Operation
To mute your telephone handset or Handsfree microphone while on a call:
1. Press MIC.
This only turns off the Handsfree microphone.
.
- OR -
Press the Microphone Cutoff key (Program 15-07 or SC 851: 40).
1 - 682
Program Name
Programmable Function Keys
System Options for Multiline
Telephones – Handsfree
Microphone Control
Description/Comments
If an extension needs handset
microphone cutoff, program a
Handset Transmission Cutoff key
(code 40). To program a MIC
Cutoff key, use code 02 as the
entry. The MIC Cutoff key mutes
conversation on a handsfree call,
but the Handset Transmission
Cutoff key mutes the handset
transmission on a non-handsfree
call.
Use this option to control the
setting for multiline terminal
handsfree microphone after being
disconnected and reconnected. If
set to 0, the microphone is always
off when the terminal is
reconnected. If set to 1, the
microphone remains in the same
state it was in when the terminal is
reconnected.
UNIVERGE SV8100
Assigned Data
For Line Keys: 1~48
0 ~ 99 (Normal
Function Code)
(default = Service
Code 851)*
* *
00 ~ 99
(Appearance Function
Code) (default =
Service Code 852)
0 = Off
1 = On
(default = 1
Microphone Cutoff