NEC UNIVERGE SV8100 Features & Specifications Manual page 62

Issue 5.0
Guide to Feature Programming
Program
Number
22-02-01
22-04-01
22-05-01
22-07-01
Operation
1 - 52
Program Name
Incoming Call Trunk Setup
Incoming Extension Ring Group
Assignment
Incoming Trunk Ring Group
Assignment
DIL Assignment
Description/Comments
Assign the incoming trunk type for
each trunk.
Assign extensions to Ring Groups.
Use this program to assign
extensions (up to 32) to Ring
Groups. Calls ring extensions
according to Ring Group
programming. There are 100
available ring groups.
Assign trunks to incoming Ring
Groups. Use this program to
assign Normal Ring Trunks
(Program 22-02) to Incoming Ring
Groups (Program 22-04).
Assign the destination extension
or Department Group Pilot
Number for each DIL Incoming
trunk.
UNIVERGE SV8100
Assigned Data
Incoming Type for Day/
Night Mode (1~8):
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or InMail)
(default = 1)
Number of Transferring
Destinations for Day/
Night Modes (1~8):
Extension Number
(maximum eight digits)
Pilot Number
(default not assigned)
Answer Key