NEC UNIVERGE SV8100 Features & Specifications Manual page 176

Issue 5.0
Guide to Feature Programming
Program
Number
10-09-01
11-07-01
11-11-01
11-11-02
11-11-03
11-11-04
11-11-05
11-11-45
11-11-46
11-11-47
1 - 166
Program Name
DTMF and Dial Tone Circuit
Setup
Department Group Pilot
Numbers – Dial
Service Code Setup (for Setup/
Entry Operation) – Call Forward
– All
Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy
Service Code Setup (for Setup/
Entry Operation) – Call Forward
– No Answer
Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy/No Answer
Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Both Ring
Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward All (Split)
Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy (Split)
Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward No Answer (Split)
Description/Comments
Allocate the circuits on the
CD-CP00 ETUs for either DTMF
receiving or dial tone detection.
Program 14-01-13 Basic Trunk
Data Setup – Loop Supervision
Enable (1) loop supervision for
each trunk that should be able to
use Call Forwarding Off-Premise.
Use to assign pilot numbers to
each Department Group set up.
Use to assign the Call Forward All
Service Code.
Use to assign the Call Forward
Busy Service Code.
Use to assign the Call Forward No
Answer Service Code.
Use to assign the Call Forward
Busy No Answer Service Code.
Use to assign the Call Forward
Both Ring Service Code.
Use to assign the Call Forward All
Split Service Code.
Use to assign the Call Forward
Busy Split Service Code.
Use to assign the Call Forward No
Answer Split Service Code.
Call Forwarding, Off-Premise
UNIVERGE SV8100
Assigned Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
Up to eight digits
(default not assigned)
MLT, SLT
(default = 848)
MLT, SLT
(default = 843)
MLT, SLT
(default = 845)
MLT, SLT
(default = 844)
MLT, SLT
(default = 842)
MLT, SLT
(default not assigned)
MLT, SLT
(default not assigned)
MLT, SLT
(default not assigned)