NEC UNIVERGE SV8100 Features & Specifications Manual page 224

Issue 5.0
Program
Number
15-02-57
15-02-58
15-03-09
15-03-10
15-03-11
15-07-01
20-02-08
20-06-01
1 - 214
Program Name
Caller Log On Busy
Display Mode of Incoming Trunk
Single Line Telephone Basic
Data Setup – Caller ID Function –
For External Module
Single Line Telephone Basic
Data Setup – Caller ID Name
Single Line Telephone Basic
Data Setup – Caller ID Type
Programmable Function Keys
System Options for Multiline
Telephones – LCD Display
Holding Time
Class of Service for Extensions
Description/Comments
Defines whether calls received
whilst the station was busy are
logged in the call logs
On receipt of caller ID matching
abdial location defines whether the
caller ID and name or memo
entries are displayed initially
Enable (1) or disable (0) the Caller
ID FSK signal for an external
Caller ID module or a 3rd party
vendor telephone with Caller ID
display.
If voice mail is used, this setting
must be disabled or the system
integration codes for disconnect
are incorrect. For Caller ID Sender
Queuing, set this option to "1".
Determine whether or not a single
line telephone extension user's
telephone should display the
Caller ID name.
Determine whether the Caller ID
type is FSK or DTMF.
Use to assign functions to multiline
terminal line keys.
This time determines how long a
user display shows Caller ID for a
second incoming call.
Assign a Class of Service (1~15)
to extensions.
UNIVERGE SV8100
Assigned Data
0 = Off (Default)
1 = On
0 = Caller ID
1 = Memo Information
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = FSK
1 = DTMF
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
0~64800 (seconds)
(default = five seconds)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
Caller ID